Stamp Positioner
Product Information This revolutionary stamping tool and moveable stamping surface allows you to create multiple special effects as well as position your stamp on the card where you want it! Designed for both right and left handed stampers... if left handed just remove the locking bar flip the L-Shaped bar over and replace the locking bar. To position a stamp on a card move the paper under the L-shaped bar until you have it where you want it... use the uninked stamp to position where you want it on the card... when the paper is correctly placed put a piece of removable tape or a drafting dot over the bottom corner of the card... you will use this procedure first with ALL the following techniques using the Viva Las Vegastamps! Stamp Positioner. Ink up your stamp and stamp it perfectly in the position you want it. If you want to create a duplicate of this card (to keep for yourself) or 20 of the same card or whatever once you have the location of the stamp on Card 1 figured out take two pieces of masking or other type of tape and place them alongside the exposed corner of your card as a guide for your next cards. Just take off the finished card place your new blank cardstock in the same position and stamp... if using several stamps do all the cards with one stamp and then remove the tape position Card 1 and when satisfied with its placement put tape alongside the corner again and stamp all your cards with the second stamp and so on until your cards are all finished. With the Stamp Positioner you can emboss ANY kind of ink... Kaleidacolor or any other dye ink pads Marvy Markers etc. After stamping your card and coloring in on the stamp positioner and the ink has dried clean your stamp(s) and re-ink using a clear embossing ink pad and re-stamp your image(s)... remove the card cover with our Ultra High Gloss Clear Embossing Powder tap off the excess powder and hit with the heat gun. Voila! Your entire card is embossed for a knockout effect. Many stampers like to color their stamps with Marvy Markers but its always a problem that the stamp dries out before you get all your colors on and colors can tend to touch each other and run... no more! With our Stamp Positioner you ink up all the parts you want to do in the same color stamp your card clean your stamp ink up your second color on the stamp and repeat... this way your colors stay bright and vibrant and you can even leave your project and come back and finish it any time adding in your other colors! You can even overlay colors on top of your first colors! And if you want you can even emboss the card using the technique mentioned above! Heres a great way to color in your stamp and add detail later... first stamp with a very light pink pad and then color in your stamp... you dont even have to worry about covering up dots and lines in the image... after youve colored it in you then re-stamp with a black pad and all the lines and dots are returned to the top of the image for a stunning effect... great with Twinkling H20s Radiant Pearls Chalks... whatever. And of course you can also emboss the finished product if you want. Finally the Viva Las Vegastamps! Stamp Positioner saves you ruined cards... all stamps are not created equal... sometimes you stamp and part of the stamp doesnt show up because you didnt apply pressure evenly or the stamp has a weak spot... your card is ruined right? Wrong! You just ink up the weak part and re-stamp putting extra pressure in that area and all your stamp detail is restored and your card is saved! Youll get to love our Stamp Positioner so much that youll use it every time you stamp! It will become your stamping table... you can easily stamp on your knee or any surface when traveling or watching TV or whatever and its very easy to clean up if you get ink on it. Youll wonder how you ever stamped without it!
Be the first to review this product!
Price: $49.95 $34.95
